AMC’s top tips to prevent incidents around the drill rod pipe
Drillers missing a finger or two have always been a common occurrence in our industry. 90% of these incidents take place around the drill rod pipe due to just a few common processes:
- during rod insertion or extraction
- retrieval or displacement of the inner tube
- when applying drill rod and thread grease directly to the stands while the rods are in the foot clamp / gripper-box, while being held stagnant through the rotational head / drill chuck or by the hoisting cable
When drill rods are not handled effectively then drillers are at risk from; crushing, repetitive strain and manual handling injuries. Accidents like these cause pain for the victim and potential lifelong injury’s, with lost time also heavily impacting operations that may already be under pressure.
Drill rod grease is still one of the traditional and most cost-effective solutions to reduce severe rod vibration and high downhole torque conditions that can create undesirable problems and reduced Rate of Penetration (ROP). The most common problems are:
- breakages in the rod line that will follow with a the retrieval of the broken pipe
- general wear-and-tear and reduced rod life
- hole deviation
- weakened thread joints
- additional stress and higher workload requirements for the drill rig mechanics, hydraulic components and main engine
- separated casing to cause problems down the hole
A lot of drilling contractors and resource companies come to us questioning the value of using lubricants and rod greases. However these products are vital to the reduction of rod tripping and can be the necessary safeguard against major manual handling issues, particularly as most of these accidents occur at depth.
AMC’s aim is to eliminate or reduce the overall use of drill rod grease, incidental risks, loss in production time and wear on downhole drill equipment. The company’s approach is to focus on overall improvement in safety and productivity, with high quality drilling fluids, better workflows and technology innovations such as the AMC BOS™ can provide better hole stability and water return without disrupting operational flow.
Our approach for better, safer greasing
One shortfall of modern day exploration rig designs is the ability to apply any form of grease through an automated system. An automated thread greasing system has had a long history in operations on production drilling machines drastically reducing manual handling as well as the presence of hands around the rotational and clamping mechanism of a drilling rig.
Regardless of this, the use of greases in the exploration drilling industry is a must, especially in dry hole conditions caused by downhole loss of fluid return and angled / wedged holes. In Africa, there are very few standard operational procedures or methods of application when applying grease.
AMC has a few key guidelines to follow:
1. Most of the time the drillers over grease the rod surface, causing the excess grease to collect around the drill collar or in the ground pits forming a floating mattress of grease on the water surface. The company suggests the following guideline for the required amount of grease per rod diameter.
For dry hole conditions use:
|NQ Rods||1-3 kg per 100m|
|HQ Rods||2-4 kg per 100m|
|PQ Rods||3-5 kg per 100m|